Freud LU84R011 10-Inch 50-tooth ATB Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating

List Price: $97.00
Our Price: $65.36
You Save: $31.64 (33%)
Availability: Usually ships in 24 hours
Category: Tools
See more product details

Product Details

• An ideal saw blade to cut hardwoods and softwoods with a smooth, clean edge
• Large gullets and flat top teeth for ripping
• Kickback-reducing design
• Non-stick Perma-Shield coating reduces gumming, rusting, and corrosion
• Limited lifetime warranty

• MLCS 9456 Clamping Miter Gauge
• Freud LU89M010 10-Inch 72 Tooth TCG Nonferrous Metal Cutting Saw Blade with 5/8-Inch Arbor
• Freud LU87R010 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• Freud LU91M010 10-Inch 60 Tooth ATB Crosscutting Miter Saw Blade with 5/8-Inch Arbor
• Freud LU95R010 10-Inch 72 Tooth TCG Solid Surface Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Description of Freud LU84R011 10-Inch 50-tooth ATB Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating

About Freud LU84R Industrial Combination Blades
Freud?s industrial series blades were designed for the serious woodworker. Available in a variety of styles for different applications, LU blades feature thick carbide tips, precision-tensioned bodies found in every Freud quality blade. Some LU blades include a red Teflon coating that helps reduce friction, heat build-up, and gumming ? which prolongs the life of the blade.

The LU84R Family

About This Product: Freud LU84R011 10-Inch 50-Tooth Combination Saw Blade
The Freud 10-Inch 50-Tooth Combination Saw Blade with Perma-Shield coating features four alternate top bevel teeth and a square raker tooth per section that lets you cut hardwoods and softwoods with a smooth, clean edge. The thick MicroGrain carbide tips allow for more cuts between sharpening, and the non-stick Perma-Shield coating reduces gumming, rusting, and corrosion. The blade features a 5/8-inch arbor and comes with a limited lifetime warranty.

Applications
The Freud LU84R011 is ideal for ripping or cross-cutting hardwoods and softwoods with a smooth, clean edge.

Key Tech Specs

• Thick MicroGrain carbide tips
• Non-stick Perma-Shield coating
• Laser cut blade body
• Kickback reducing design
• Tri-metal brazing for impact-resistant tips

Warranty
Freud saw blades are covered by a limited lifetime warranty.

LU84R011 Combination Saw Blade with Perma-SHIELD At a Glance: Ideal for crosscutting materials 3/4 to 3-1/2inches thick, and ripping materials 3/8 to 1-1/2 inches thick Heavy-duty plate with laser-cut, anti-vibration slots Tough Perma-SHIELD coating reduces friction and heat buildup Technical Specs: Coating Perma-SHIELD Diameter 10" Teeth 50 COMB Arbor 5/8" Kerf (K) .126 Plate (P) .087

Large Gullets allow for fast ripping and easy chip removal Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life, and giving a crisp, swirl-free flawless finish

Combination Tooth Design for Versatility and Accuracy
This blade's 50 teeth are arranged in groups of five, each of which includes one flat-top raker tooth for fast, accurate ripping. Each flat tooth is followed by four alternating-top-bevel (ATB) teeth that are particularly well suited to crosscutting, and large gullets between the teeth ensure effective chip clearance.

This blade is designed for optimal performance when crosscutting materials that are 3/4 to 3-1/2 inches thick or ripping materials that are 3/8 to 1-1/2 inches thick. It makes quick work of hard- and softwood, plywood, and chipboard. It can also handle laminates or tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a .126 kerf.

Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade.

High-Density Carbide for Maximum Cutting Performance
This combination saw blade's 50 teeth are finished with tips made from Freud's application- specific TiCo high-density carbide "combination blend." Formulated to help the blade maintain a sharp cutting edge for longer when faced with a variety of applications, this blend includes just a little bit more high-density tungsten carbide than other TiCo blends. And it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box
Freud LU84R011 Combination Saw Blade--10-inch diameter, 5/8-inch arbor, 50-tooth COMBO design.

Table Saw Blades

• Tools & Home Improvement > Categories > Power Tool Accessories > Blades